I had really liked UM Model after building their SU-100 kit earlier. When I got my hands on the Marder III kit, I didn’t want to waste any time and decided to start building it right away. Since this is an open-top vehicle, the interior also had to be assembled and painted. I was genuinely curious to see how much detail they managed to fit into a model at this scale, so I began the build with a lot of interest.
I found this reference photo online. I believe it was taken while the vehicle was actively in service. The tank in the photo had a lot of additional tools and equipment mounted on it. I wanted to do something similar on my model.
I started by assembling the tank. I had previously built another UM kit, the SU-100, and had experienced quite a few fit issues with that one. This kit was different. The metal parts included in the kit also went together very easily. Some plastic parts were broken or missing, but that didn’t cause any serious problems.
For painting, I once again used the sponge painting technique. First, I painted the entire model by dabbing Revell Aqua Color 36178 Panzergrau onto the surface with a sponge. In the next step, I used Revell Aqua Color 36179 Blaugrau to apply a blue-grey tone with a sponge to all areas except the recessed parts of the Panzer grey base.
In the following stage, to further break up the monotony of the color, I applied weathering to the upper surfaces using Revell Aqua Color 36374 Grau, again with a sponge. In the final step, I used Revell Aqua Color 36159 Himmelblau and applied dry brushing to the edges and corners with a brush. This completed the main grey paintwork of the tank.
Once the main paint was finished, I moved on to painting the details. For the tracks, I used Revell Aqua Color 36183 Rust. This rust tone from Revell suits tracks very well. Over the rust base, I dry-brushed the tracks with Revell Aqua Color 36199 Aluminium to add a metallic effect.
I painted the rubber parts of the wheels using Vallejo Model Air 71315 Tyre Black. The seats inside the vehicle were painted a brown leather color using Vallejo Model Air 70871 Leather. During this stage, the seats broke multiple times.
I painted the wooden parts of the tools on the tank using Revell Aqua Color 36314 Beige. Looking at the photos now, I realize I should have spent more time working on these areas. For the metallic parts of the tools, I used Revell Aqua Color 36109 Anthracite. I then dry-brushed those metallic areas with Revell Aqua Color 36199 Aluminium, completing the painting stage entirely.
Once painting was finished, it was time to add details similar to those seen in the reference photo. First, I scratch-built a bucket from leftover plastic parts. I made a carrying wire for the bucket using hooks taken from other kits. I painted the bucket with Revell Aqua Color 36109 Anthracite and finished it with dry brushing using Revell Aqua Color 36199 Aluminium.
I made a tarp for the upper part of the vehicle using parafilm. I painted this tarp with Vallejo Model Air 70314 Canvas. I added an MG machine gun taken from another kit on top of the tarp. On the left side of the tank, I placed a tarp from a resin set given to me by İbrahim Öner. I painted this tarp the same canvas color and added a rifle on top of it.
I also wanted to add details to the interior. For this purpose, I placed ammunition rounds inside the vehicle that were also given to me by İbrahim Öner. I didn’t paint the shells, but honestly, it would have been better if I had.
To fill up the interior, I added a few crates. I first painted the crates with Vallejo Panzer Aces 70310 Old Wood. Then I applied a wash using Tamiya Panel Liner Accent Color TAM87140 Dark Brown. After it dried, I applied a second wash to the recessed areas using Tamiya Panel Liner Accent Color TAM87131 Black.
Finally, I added fuel cans taken from other kits to the sides and rear of the vehicle. I painted the cans with Revell Aqua Color 36109 Anthracite and then dry-brushed them with Revell Aqua Color 36199 Aluminium.
I painted the exhaust at the rear of the vehicle with Revell Aqua Color 36183 Rust. After that, I applied a wash using Vallejo Model Wash 76505 Light Rust. I added soot effects to the exhaust outlets using Humbrol Weathering Powder AV0004 Smoke pigment.
Once the painting stage was complete, I varnished the model as I always do, using Vallejo 70522 Acrylic Resin Satin Varnish. I applied the decals included in the kit. UM Model decals are thin and high quality, so this stage went smoothly. After the decals dried, I sealed the model again with satin varnish.
I first applied a pin wash to the model using Humbrol AV0201 Black Enamel Wash. After washing the tracks with AK Interactive AK083 Enamel Track Wash, I applied a wash to the interior using AK Interactive AK093 Enamel Wash for Interior.
I applied filters over the entire model using Winsor & Newton products. For this purpose, I used Winton Titanium White, Burnt Sienna, and Cobalt Blue Hue in sequence as overall filters. Once the filtering stage was complete, I sealed the model with Vallejo 26518 Matt Acrylic Varnish.
As always, I started the weathering stage with the tracks and the lower hull. For this, I used various pigments I had on hand. I mixed Vallejo pigments with Cadence thinner and applied them to the wheels and tracks. Afterwards, I removed the excess using a brush dampened with thinner.
The tank had many deep, recessed interior surfaces. I assumed dust would accumulate in these areas as the gun was fired, so I poured pigments directly into those sections. I then dropped thinner over them to fix the pigments in place. I also passed over the flat surfaces of the tank using AK Interactive AK4062 Light Dust Deposite mixed with thinner.
In areas inside the tank where the crew would frequently move, I applied wear effects by dabbing AK Interactive AK711 Chipping Color with a sponge. I also used pigments on the very corners to enhance the dusty appearance.
Finally, to give the vehicle a metallic look, I rubbed the edges with the tip of a graphite pencil. After that, I applied a graffiti pencil over all surfaces to strengthen this metallic effect. I also added pigments to the items I had added later to give them a dusty look.
After finishing the weathering stage, I placed the tank in its spot in the display cabinet and looked through my stash to decide which kit to build next. Unfortunately, this vehicle fell and broke during the İzmir earthquake. Compared to a disaster in which people lost their lives, this is obviously not a major issue—but thinking about the effort that went into it still makes you feel sad.
No comments:
Post a Comment